Plastic bottle making machine

plastic bottle making machine For ordinary preforms, the machine can runs full automatically with preform auto-loader.

Plastic bottle making machine ZQ-M600-2

ZQ-M Series is Dual-purpose Automatic Blow Molding MachineBy structure optimization and technicial innovation, Cost-effective ZQ-M series of blowing  machines have been developed on the basis of ZQ-A series of PET bottle blowing machine.ZQ-M series PET blowing machines are double-purpose blowing machines. According to different tpes of preforms,users can choose different operation method flexibly. For  ordinary preforms, the machine can runs full automatically with preform auto-loader. For  special preforms, they will be loaded manually. Its multiple use and low cost will save you  much.ZQ-M series of blowing machines can produce different shapes of 0.6L, 1.5L, 5L and 10L  carbonated, mineral, pesticide, cosmetics, wide-mouth and other plastic PET/PP containers. They have all the advantages of ZQ-A series of blowing machines: Low rejection rate, high  speed,stable running and easy operation.FeaturesA.     Stable performance with advanced PLC.B.     Conveying preforms automatically with conveyor.C.     Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.D.     High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.E.     High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.F.     No contamination and low noise with the air cylinder to drive the action instead of the oil pump.G.     Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.H.     Strong clamping force with high pressure and double crank links to lock the mold.I.       Two ways of operating: automatic and manual.J.     Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

TYPE	ITEM	ZQ-M600	ZQ-M600-2	ZQ-M600-3	ZQ-M1500
CONTAINER	Number of cavity	1	2	3	1
	Output	1200-1500 pcs/hr	2000-2300 pcs/hr	3000-3300 pcs/hr	1000-1200 pcs/hr
	Max.container volume	0.6L	0.6L	0.6L	1.5L
	Max.neck diameter	48mm	48mm	48mm	48mm
	Max.container diameter	60mm	60mm	60mm	105mm
	Max.container height	260mm	260mm	260mm	350mm
ELECTRICAL SYSTEM	Number of lamp	14pcs	28pcs	32pcs	28 pcs
	Max.heating power	9kw	22kw	32kw	22kw
	Installation power	12kw	25kw	35kw	25kw
	Actual power consumption	9kw	14kw	20kw	16kw
AIR SYSTEM	Operatating pressure	7kg/cm²	7kg/cm²	7kg/cm²	7kg/cm²
	Low pressure consuming	800Ltr/min	1000 Ltr/min	1200 Ltr/min	900 Ltr/min
	Blowing pressure	≤30kg/cm²	≤30kg/cm²	≤30kg/cm²	≤30kg/cm²
	High pressure consuming	1200-1600Ltr/min	1500-2000Ltr/min	2000-2500Ltr/min	1200-1600Ltr/min
CHILLER WATER	Operating pressure	5-6 kg/cm²	5-6 kg/cm²	5-6 kg/cm²	5-6 kg/cm²
	Temperatuer	10°C	10°C	10°C	10°C
	Consuming	3600kcal/hr	5600kcal/hr	7600kcal/hr	3600kcal/hr
	Flow rater	20Ltr/min	30Ltr/min	40Ltr/min	20Ltr/min
MACHINE	Machine dimension	2.5×1.4×1.7(m)	2.9×1.55×1.8(m)	3.4×1.4×1.8(m)	2.9×1.7×1.85(m)
	Machine weight	1.7T	1.8T	2.1T	1.8T

Plastic bottle making machine